banner



Home  ›  Driver Logitech Quickcam Zoom Windows 7

Driver Logitech Quickcam Zoom Windows 7

Written By Thursday, 21 July 2022 Add Comment Edit

locked

Logitech quickcam zoom commuter RRS feed

  • Question

  • I accept a Logitech Quickcam zoom webcam and tin't find a driver for it.

    Vista RC1 just sees a unknown device and the lite on the camera is on.

Answers

  • You lot'll have to wait until Logitech comes out with a commuter that is compatible with Vista. Until and so you lot are most probable out of luck.

    Andre Rivera

All replies

  • You'll have to wait until Logitech comes out with a driver that is compatible with Vista. Until and then you are most probable out of luck.

    Andre Rivera

  • Same Problem with Logitech 4000

    USB, tried to install logitech commuter, tried compatability way. Software will not recognize driver.

    Windows Vista x86 does not even have a camera commuter choice?

    What gives?

  • I am afraid you are going to have to look for logitech drivers

    check out their forums:

    http://forums.logitech.com/logitech/board?board.id=quickcam_software

    Y'all volition see there is a few threads for vista and x64 drivers all containing numerous cheesed off logitech webcam owners.

    It would seem that logitech are in no hurry to become out their driver. Meanwhile i have got to keep reconnecting my one-time xp auto but to have daily video chats with the family.

    Oh well...........

  • I have a Logitech Quickcam Zoom and this is how I got it to work:
    1. Install QuickCam 32-chip Version: 10.5.0 Build 1096b
    It tin be found here: http://www.logitech.com/index.cfm/downloads/software/CA/EN,CRID=1794,contentid=10234
    2. When you go to the camera detection part where information technology asks you to plug in your camera, plug it into a new usb port (if yous had information technology plugged in when you installed Vista) and just printing skip.
    3. Windows may try and find the driver for it, you tin can abolish that too.
    4. Install the old QuickCam software (Version: 8.iv.8 build 1034A)and overwrite annihilation information technology asks you to (it will neglect to install completely because of the new version, merely information technology will put the files you lot need into the Logitech program files directory.
    The former software is here: http://world wide web.logitech.com/index.cfm/downloads/software/CA/EN,CRID=1794,contentid=7649
    five. Go to the windows orb (former beginning button), open control panel, go to arrangement, and so on the peak left of the window click device manager.
    6. Notice the unknown usb device (hopefully you only have one... otherwise unplug annihilation else that doesn't work or you haven't updated the commuter for yet)
    seven. Right click and select update driver, choose a location to notice the commuter, navigate your way to C:\Program Files\Logitech\QuickCamWebInstall\Drivers\WinNew\PRO2
    eight. Press OK or whatever, and let it install.
    9. Enjoy!

    Mine didn't fifty-fifty demand to reboot and worked with the 10.5 QuickCapture software. Still demand to test with Skype and Live Messenger though.

  • Information technology did work for me likewise, I'k under Vista Ultimate and using Quickcam zoom.

    Cheers so much, I almost ordered another Webcam.

    and I think this is the aim of Logitech by not updating their drivers to vista.

    And then I can confirm that the to a higher place instructions work 100% clear and I did test it with all programme that require a webcam (MSN, Yahoo, Skype etc..) it's POSITIVE.

    Keep Upward The Expert Work, and Let's share those info to everyone.

  • Cheers very very very much.

    Works like a charm here.

    Don't have to wait for logitech to give me the proper drivers.

    Thanx.

    Chappy

  • Hello i saw you lot post very prissy but i could not make it work? Do yous know if this tricks works if you lot accept 64-bit Vista? Or do ane know what else to do?

  • Azural,

    Y'all're the nuts mate.  Ta much.  Works perfect with Skype besides!

    Saved me a few $$$ and avoided ownership a new cam!

    Cheers

  • thkx very much.

    It works!!!

  • hello all been trying to set upward my quick cam zoom for weeks at last cheers to this i have but with a few modifications.

    download both  software updates  qu848 xp update and  qu1051 vista update at present i know that  qu1051 is for some other camera merely if  install the xp once first then the vista once over the top ignore all errors will sort its self out afterwards restart but it works and thats all i did nothing more.

    adept luck hope information technology works for some of you lot.

  • HaredZombie wrote:

    Hullo i saw you post very dainty but i could non brand it piece of work? Practice yous know if this tricks works if you have 64-bit Vista? Or do one know what else to do?

    hee mate i accept ultimet 64 bit aswell just become to

    1Go to the windows orb (former first button), open control panel, go to system, and then on the tiptop left of the window click device manager.

    2Find the unknown usb device your webcam ofcourse

    3Right click and select update driver, choose a location to find the driver, now select beneath the search i want to do it myzelf (i have a dutch version and then dont know the existent name)

    4 once you are in there u tin sellect left mill and practise logitech on the recht your type choose logitech quickcam pro 4000

    5 bask the webcam

    i know this because they are both about same hardware then have intendance and dont show to much stuff

  • Bright stuff...many thanks..

  • Worked like a charm, with one small deviation.  When I updated the drivers in control panel, instead of selecting the PRO2 binder, I had to let Windows search the entire Logitech folder.  I beloved the option to include subfolders in driver searches.  It makes things a helluva lot easier.  Thanks again, you are the human!

  • Hello guys,

    Can somebody be kind to upload those 2 files mentioned past Azural in some place? Apparently Logitech has changed their website and now the file is not bachelor anymore..or mayhap in a different link Stick out tongue

    Thanks, I really appreciate it Big Smile

    regards, pojz

  • kews84 wrote:
    Hullo guys,

    Can somebody be kind to upload those two files mentioned by Azural in some identify? Plainly Logitech has changed their website and now the file is not available anymore..or perhaps in a unlike link

    Thanks, I really appreciate it

    regards, pojz

    sorry, just constitute information technology here:
    Logitech ftp

  • Finally the easiest instructions to install the Logitech QuickCam Zoom on Vista:
    - Get to ftp://ftp.logitech.com/pub/techsupport/quickcam/
    - Get the qc828en.exe y qc1051en.exe files. Note that yous may cull some other language ( for example qc828esp.exe y qc1051esp.exe).
    - Install both files (get-go the qc828). Myabe you've to restart.
    -  Connect the webcam. Windows volition try to detect the drivers.
    - You'll have to select the drvier's path manually. Choose this folder: C:\Program Files\Logitech\QuickCamWebInstall\Drivers\WinNew\PRO2.
    - Vista volition install the drivers and your webcam should work now!

  • It works perfectly with the newest QuickCam v11.0 32bit too! Wonderful aid mate, you are the greatest!!!

  • Has anyone had this piece of work with YIM!?
    Although I become a preview on my side, the recipient side always gets a black box.
    Yahoo help page states:

    Some Logitech webcam drivers may cause one of the post-obit problems:

    • Windows freezes when accessing the webcam
    • A blackness screen appears when using the webcam in Messenger
    • A 'Webcam not found' error bulletin appears.
    • Afterward three seconds, the sound drops out of calls fabricated via Yahoo! Messenger

    If you lot already verified that your device is compatible through the in a higher place steps and you're a Logitech webcam user, please click here to update your Logitech webcam driver.

    Also has anyone tried this with the v11 of the driver now available?

  • Hello everyone,

    Although I didn`t communicate with anyone direct, all of your imput & comments really helped me get my QuickCam 4000 running, I`m describing the difficulty I had in case anyone has the same. After the driver installed, no audio would come out of my speakers, almost similar the install messed around with the codecs. No sound would occur, even from startup, WMP or anything else. After the install, I recorded a video, played it dorsum in WMP & the problem fixed itself.

  • You're a good person Azural and yous'll definitely go to sky !!  I have a Logitech Quickcam Zoom too (white sphere with bluish visor) which Logitech says "won't work with Vista".  It worked fine on my old PC with WinXP and had zoom and movement detection, so was great for home security.  I was prepared to buy a new photographic camera for Vista, withal, Logitech's electric current range appears to accept been dumbed downwards and there'south cipher with these features.  And so I followed your instructions to get it working on my new Vista PC:
    ane.  Installed QuickCam 32-bit Version v10.5.i for Quick Cam Pro 4000 downloaded from the Logitech website (nb: when you lot are in the webcam software downloads area of the Logitech website, y'all demand to click on "Didn't Find Your Camera?" -- this volition so take you to downloads for older models which are no longer in their current product range)
    2.  During installation, when it asked if I wanted to install the driver now, I replied "No, I will Install Later on"
    3.  And then I went to Windows Device Managing director to install the device commuter manually - constitute the USB device marked "Unknown" - right clicked to Install Driver > I will locate the driver on my reckoner > Imaging Devices > Logitech > then scrolled down the list on the right and selected Quick Cam Pro 4000 (ignore the warning)
    4.  Voila - the Quickcam Zoom now works fine on Vista.  Unfortunately, Ill0gitech'due south electric current quickcam software range has much less functionality than the erstwhile Image Studio that I had before (the new stuff seems to be designed only for kiddies with IM)
    5.  SO I purchased Bluish Iris webcam software (for Vista) from Perspective Software - approx. $19 - this is designed for home security, and has full functionality including move detection - you can record video and snapshots and set your own frame charge per unit, resolution, sensitivity, etc.
    vi.  Bingo !!  Now my true-blue former Quickcam Zoom is happily cruising forth on Vista doing pretty much what it used to - no thanks to the marketing geniuses at illogiteck
    7.  NB:  for both the Logitech Wecam awarding and Blue Iris, select "Launch at Startup" = NO
    8.  When you launch Blue Iris, the Logitech desktop shortcut thingie will pop upward (just ignore it, or go out it)
    nine.  Y'all tin launch either the Logitech Webcam application OR Bluish Iris, notwithstanding, if you launch Logitech Webcam first, and then endeavor to launch Bluish Iris, Blue Iris may say "Photographic camera not Connected" (because the Logitech Webcam application grabbed it showtime; still, you can run both applications simultaneously if y'all want, provided yous launch Blue Iris outset).

    • Proposed as answer by Sabbatum, October ii, 2010 10:35 PM

  • Oh my God! Something that FINALLY works! I've been trying to get my Quickcam Zoom installed on Vista for most 2 months now. I gave up several times then changed my listen & tried again with no luck whatsoever. Just last week I put the damn thing upwardly for sale & went & bought a Lifecam VX-grand ii days ago. It's OK, but I liked the Logitech much better. Well I didn't finish up selling information technology thank God & at present that I have it up & running I'll be taking the new one back. You are a true lifesaver Azural. I should take my refund & purchase yous a overnice present. LOL! Thanks and so much. I love you man!

  • I take windows vista 64 bit just tin't detect driver

  • It looks like they might accept taken downward the qc828en or qc828enu file. I'm running xp x64 and I suspect that this fix'll do the trick if I can get a hold of those files..

  • I just had a matter in the logitech back up forums, I'll exist posting screen shots here in a bit as they deleted the postings.

  • It's been brought to my attention that the 32 bit xp drivers .inf files can be decorated to work with xp x64 (and likely vista). There'southward a document that I'm going to be going from on that linked below, if anybody else is interested in taking a look. This just makes it even more retarded that logitech didn't do information technology themselves.

    http://www.microsoft.com/whdc/driver/install/64INF_reqs.mspx

  • Thanks, this was VERY helpful!

  • You oasis't done the file ornament or have any additional info exercise y'all? I haven't looked into it notwithstanding since my last post actually.

  • Were you lot able to produce some working drivers? I oasis't done whatever work since my last post to be honest.

  • This play a joke on doesn't work with XP x64 every bit eight.iv.viii doesn't have an x64 version. Nethertheless I was able to install my Logitech QuickCam Zoom (USB pid 08b4) using the following method:

    1. Download ftp://ftp.logitech.com/pub/techsupport/quickcam/qc1051enu_x64.exe

    2. Unpack Drivers dir using Rar or 7z

    three. In file Drivers\x64\PRO64\lpro64v.inf supercede all "08bd" with "08b4" or just add the corresponding lines

    iv. When asked to install drivers choose ...(advanced) and select Drivers\x64\PRO64\ to search for drivers

    five. Select Logitech QuickCam Pro 4000 and continue with installation.

    This made my Logitech QuickCam Zoom to work in Skype perfectly.

    I suppose you tin can install the Logitech QuickCam software afterward information technology. I simply don't need information technology.

    As well I suppose this will work with Vista x64 merely I don't have one at hand to try out.

    • Proposed as answer by Carlitouch Tuesday, November 26, 2013 10:36 PM

  • I take a question for you.  I went to the wite on your step #one, but could not locate what you are talking nearly.  The link doesn't take to directly to the version i am supposed to download, so how do i find it on Logitech's site??  Thank you for your help!

  • I followed this method as advocated past Carbon Unit of measurement but without success.   In Windows Device Manager I could discover no reference to Imaging Devices or indeed to Quick Cam Pro 4000.  A search of the computer reveals that this is not mentioned anywhere.  The camera light comes on and when an attempt to operate it is made a bulletin is displayed to the effect that the photographic camera is not properly connected - unsurprisingly !

    Has anyone else whatever other bright ideas ?

  • Great post, worked like a charm in msn messenger.  I've had this cam in storage for most 1 year, go figure lol. Thank you for the mail service!

  • Delight I am despereately in need of a drive for my webcam as the above message shows. I trust you and that is why i am appealling to you for this. Thanks for your continues assistance.

    Ann

  • Did the fox for me!!  Thanx very much! Big Smile (happy face)

  • Thank you your a genius i was getting worried i would need a new camera seen as it is just 2 months old

    thanks loads and it works on mine for messenger and skype

  • gozer! super bedankt voor je post!!!

    Ik had bijna xp teruggezet maar nu ben ik weer wat verder geholpen, mocht je nog een oplossing weten voor autocad hoor ik het graag!!!

    vista ultimat 64... tja tis ff wennen en geouwehoer, maar ooit zou ik het wel relaxed gaan vinden....hoop ik....

  • hey I have this quickcam and am running a 32bit version of vista. I am trying to get the file mentioned before in this mail -  qc828en.exe

    but can't find it on the logitech ftp.  Can someone point me to this file or send me this? Thank you

  • Chappy584608 wrote:

    Give thanks you very very very much.

    Works like a charm here.

    Don't take to wait for logitech to give me the proper drivers.

    Thanx.

    Chappy

  • Iceslice, thank you ever so much, works similar a dream.

    Been pulling my hair out trying to get information technology to work on x64

  • Out of agony I downloaded and installed the qc848enu.exe file (in place of the qc828enu.exe file in the instructions in a higher place) from the logitec FTP site and everything seems to be working OK. I'yard running Vista 32 bit.

  • Can you let me know when, then i tin can pay it!!!

  • This solution is great! I use Vista home premium 32 bit.  I downloaded qc848nld.exe and the newest qc1150.exe. I installed the qc848, restarted my computer. Installed qc1150 and waited for the connect screen. Equally soon as you connect the webcam windows kicks in. Skip the connect screen from the logitech install and end the installation of the program. So cull install driver from the windows screen and signal that you want to search your drive for the commuter. Go to the path Bajo en calorías mention and the commuter installs without a problem.

    My camera came upwardly every bit a Quickcam Zoom as information technology should and works fine in all programs.

    Thanks for the tip guys!

    Greets, Chriz

  • Just a note to anyone else with this trouble:

    If y'all have a Quickcam Zoom, utilise 08B3
    ... 08B4 only works with the silver models!

    Here are the rest of the model codes:

    08B0  ;  Pro 3000 (Mono)
    08B1  ;  Notebooks Pro
    08B2  ;  Pro 4000
    08B3  ;  Zoom
    08B4  ;  Zoom (Silver)
    08B5  ;  PTZ (Orbit)
    08BD  ;  Pro 4000

    iceslice wrote:

    This trick doesn't work with XP x64 every bit 8.4.eight doesn't have an x64 version. Nethertheless I was able to install my Logitech QuickCam Zoom (USB pid 08b4) using the following method:

    1. Download ftp://ftp.logitech.com/pub/techsupport/quickcam/qc1051enu_x64.exe

    2. Unpack Drivers dir using Rar or 7z

    3. In file Drivers\x64\PRO64\lpro64v.inf replace all "08bd" with "08b4" or just add the corresponding lines

    iv. When asked to install drivers choose ...(advanced) and select Drivers\x64\PRO64\ to search for drivers

    five. Select Logitech QuickCam Pro 4000 and continue with installation.

    This made my Logitech QuickCam Zoom to work in Skype perfectly.

    I suppose yous can install the Logitech QuickCam software afterwards information technology. I but don't need it.

    Also I suppose this will piece of work with Vista x64 only I don't have i at hand to endeavor out.

  • Thanks man, My webcam breathes.

  • So what to do when information technology wont let you install al lesser version of teh software?

    I have been trying all that you posted, merely no success

    South

  • Many thanks - cracking solution. Had a problem finding Quickcam 32bit version but used QUICKCAM CHAT - 32 bit Vista driver eleven.5. Worked a treat. Had to reboot to employ the Quickcam adjustments eg book, brightness etc.
    Thanks again

  • I copied the http......... and yahoo couldn't find this location.  I have a webcam with windows vista

    and it doesn't piece of work and was hoping your directions  would work.

  • amazing dude, thanks a lot.

  • iceslice wrote:

    This trick doesn't work with XP x64 equally 8.4.eight doesn't accept an x64 version. Nethertheless I was able to install my Logitech QuickCam Zoom (USB pid 08b4) using the following method:

    1. Download ftp://ftp.logitech.com/pub/techsupport/quickcam/qc1051enu_x64.exe

    two. Unpack Drivers dir using Rar or 7z

    3. In file Drivers\x64\PRO64\lpro64v.inf supersede all "08bd" with "08b4" or just add the corresponding lines

    four. When asked to install drivers choose ...(advanced) and select Drivers\x64\PRO64\ to search for drivers

    5. Select Logitech QuickCam Pro 4000 and go on with installation.

    This made my Logitech QuickCam Zoom to work in Skype perfectly.

    I suppose yous can install the Logitech QuickCam software subsequently it. I just don't demand it.

    Likewise I suppose this will work with Vista x64 merely I don't have 1 at hand to try out.

    I've completed these steps and it "almost" works (on Vista64) simply no luck!   Whatever assistance would be appreciated.  Did anyone get this to work on Vista 64bit? It appears people got it working on 32bit but not 64bit Vista.

    I get as far as picking the QuickCam 4000 from the listing but then information technology says "Driver is not intended for this platform."

    Is there something else I need to change? I have the QuickCam Zoom (not silver).  Cheers in advance.

    Here's the first part of the file for which I inverse all 08BD references to 08B4

    [Manufacturer]
    %LogitechMfg%=Logitech,nt,ntamd64,nt.6.0,ntamd64.6.0

    [Logitech]
    %PID_08B2_DD%=PID_08B2,USB\VID_046D&PID_08B2&Mi_00      ; Pro 4000
    %PID_08B5_DD%=PID_08B5,USB\VID_046D&PID_08B5&Mi_00      ; PTZ
    %PID_08B2_DD%=PID_08B2,USB\VID_046D&PID_08BD&Mi_00      ; Pro 4000

    [Logitech.NT]
    %PID_08B2_DD%=PID_08B2.XP,USB\VID_046D&Pid_08B2&Mi_00   ; Pro 4000
    %PID_08B5_DD%=PID_08B5.XP,USB\VID_046D&PID_08B5&Mi_00   ; PTZ
    %PID_08B2_DD%=PID_08B2.XP,USB\VID_046D&PID_08BD&Mi_00   ; Pro 4000

    [Logitech.NTamd64]
    %PID_08B2_DD%=PID_08B2.XPAMD64,USB\VID_046D&PID_08B2&Mi_00   ; Pro 4000
    %PID_08B5_DD%=PID_08B5.XPAMD64,USB\VID_046D&PID_08B5&Mi_00   ; PTZ
    %PID_08B2_DD%=PID_08B2.XPAMD64,USB\VID_046D&PID_08BD&Mi_00   ; Pro 4000

    [Logitech.NT.6.0]
    %PID_08B2_DD%=PID_08B2.XP,USB\VID_046D&Pid_08B2&Mi_00      ; Pro 4000
    %PID_08B5_DD%=PID_08B5.XP,USB\VID_046D&PID_08B5&Mi_00      ; PTZ
    %PID_08B2_DD%=PID_08B2.XP,USB\VID_046D&PID_08BD&Mi_00      ; Pro 4000

    [Logitech.NTamd64.6.0]
    %PID_08B2_DD%=PID_08B2.XPAMD64,USB\VID_046D&PID_08B2&Mi_00   ; Pro 4000
    %PID_08B5_DD%=PID_08B5.XPAMD64,USB\VID_046D&PID_08B5&Mi_00   ; PTZ
    %PID_08B2_DD%=PID_08B2.XPAMD64,USB\VID_046D&PID_08BD&Mi_00   ; Pro 4000

    Under the Details tab of my Unknown device I have:

    USB\VID_046D&PID_08B4&REV_0003&MI_00
    USB\VID_046D&PID_08B4&MI_00

    Thank you!

  • Thank you man it worked, Genius>...........

  • no puedo istalar la maquina

  • i tin can't become it to piece of work either.

    i'grand tried the quickcam software, won't piece of work.

    the other software won't unpack from logitech, it says it's corrupt.

    whatsoever ideas.

    i have vista 32bit SP1 dwelling house and quickcam zoom argent

    i retrieve the workaround problem has something to do with the SP1

  • so i got it to work as a QUICKCAM, merely i can't adjust the video settings under the configuratin to adjust the brightness etc?  any ideas

  • I to take a problem with Quickcam zoom Have tried the link above but cannot find 32 flake version to download accept I missed a link?

    • Proposed equally respond by leahbeth Saturday, December 13, 2008 xi:44 AM

  • Wow thank you so much for your post Azural. Worked like a amuse. I deceit believe how sleazy Logitech is when it comes to cams. I paid 90 dollars for a webcam and buy alot of things from them. But to purposly hide info on how to keep your cam they lie and say its no manner. Power of the internet rules.

  • Thank you, I just tried this after installing Windows 7 and it worked like a charm, you just saved me ownership a new webcam

  • This trick doesn't work with XP x64 as 8.four.eight doesn't have an x64 version. Nethertheless I was able to install my Logitech QuickCam Zoom (USB pid 08b4) using the following method:

    1. Download ftp://ftp.logitech.com/pub/techsupport/quickcam/qc1051enu_x64.exe

    ii. Unpack Drivers dir using Rar or 7z

    3. In file Drivers\x64\PRO64\lpro64v.inf replace all "08bd" with "08b4" or just add together the corresponding lines

    iv. When asked to install drivers choose ...(advanced) and select Drivers\x64\PRO64\ to search for drivers

    5. Select Logitech QuickCam Pro 4000 and continue with installation.

    This fabricated my Logitech QuickCam Zoom to work in Skype perfectly.

    I suppose you lot can install the Logitech QuickCam software afterwards it. I just don't need it.

    Also I suppose this will work with Vista x64 but I don't have one at hand to effort out.

    thanks then mutch.......
    got my quickcam zoom working similar a charm.....
    on windows 7 64bit,....
    trying for months now to get it work.....

    lets al say a Big.F.... YOU .....to logitech!!!!!

  • i need driver of logitech model numbr five-uam27.help me

    • Proposed as answer past kahlid545 Saturday, October 17, 2009 five:56 PM
    • Unproposed as answer by Carey Frisch MVP, Moderator Thursday, November nineteen, 2009 half-dozen:00 PM

  • It works splendidly, in Windows 7(64bits)  too! Thank you.

  • Brilliant!!! this is also working for windows vii! Thank y'all very much

  • When i get to the step to specify the PRO2 directory, i go the following fault. The organisation cannot observe the file specified Has anyone else seen this? Im running win7 Ultimate.

  • Nice dude thank you very much ;-).

    And btw. yes the software works but likewise via using a fox ;-) !

    Being in the ..\qc1501enu_x64\ folder change to the QuickCam\x64\ folder and execute the QuickCam.msi to install the software.

    Works smoothly on my Windows 7 64bit!

  • Howdy,

    Can you requite the spcific path to get to the "drivers" directory ?

    I don't notice it whan I unzip qc1051enu_x64.exe with 7z.

    Thank y'all.

    Mad

  • hey can you assistance me with a driver problem?

    • Proposed equally answer by Wasabihound Tuesday, March 9, 2010 xi:22 AM
  • hey can you assistance me with a commuter problem?

    Hi

    I have aforementioned problem - just tried installing the quickcam zoom driver as proposed by Azural (Feb 14 2007) (bully postal service btw Azural).

    Driver installed and Win 7 recognised camera.

    Then installed Logitech Webcam Software 1.i (http://www.logitech.com/pub/techsupport/quickcam/lws110.exe).

    Seems to be working okay now and in SKYPE every bit well.

    Settings nevertheless, can't exist changed (darn!)

    thank you

    Neil

    • Proposed as answer by Wasabihound Tuesday, March 9, 2010 11:26 AM

  • thx very much this was doing my head adept job THX.

  • SOLUTION Constitute!!!

    Im using this for the quickcam Zoom on win7 32 scrap.

    Download and unzip, works for 32 and 64 flake, although it claims 64 chip only, it worked on my win7 ultimate 32 fleck.

    This of course was after post-obit this unabridged thread with every solution catastrophe in the same "Cannot find file" error encounted while installing the driver.

    This worked perfectly, no hacking or fiddling. just download unzip and bespeak the driver update window to the directory and go! works in skype and msn PERFECTLY!

    zoom/face tracking works, as practise all the image modes and color balancing options.

    http://www.styleofthestreets.com/downloads/qczoom.zip

    n8r4d3

    • Proposed as reply past n8r4d3 Tuesday, May 18, 2010 6:31 AM

  • Muchas gracias, gracias a ti tengo funcionando mi logictech zoom en  Windows seven Ultimate x64

  • Gracias!!! Funciona en Windows 7 Professional a 32 Bits!!

    Saludos!!

  • Yes information technology did work for me except that I used the 64bit QuickCam package for the Quick Cam Pro 4000 commuter.

    Updated the driver manually of the "unknown" USB device and it works beautifully with my Vista SP1 64bit. For simple conversation IM video is everything I demand. I tin can fifty-fifty use the zoom characteristic of my Quick Cam Zoom. Webcam fabricated useful over again.

  • Azural - You are a genius my friend. Give thanks y'all very much for the incredible tip. I don't use webcam much just was annoyed when I couldn't go it to work!

    Thanks again

    Bruno

  • SOLUTION FOUND!!!

    Im using this for the quickcam Zoom on win7 32 bit.

    Download and unzip, works for 32 and 64 bit, although information technology claims 64 bit just, it worked on my win7 ultimate 32 bit.

    This of course was after following this entire thread with every solution catastrophe in the same "Cannot find file" error encounted while installing the driver.

    This worked perfectly, no hacking or fiddling. just download unzip and point the driver update window to the directory and go! works in skype and msn PERFECTLY!

    zoom/face tracking works, equally do all the image modes and color balancing options.

    http://www.styleofthestreets.com/downloads/qczoom.zip

    n8r4d3


    Hi. I don't found zoom/face tracking "intelligent" option in Windows 7x64. But, camera information technology'due south working and other options it'southward good.

    Logitech Webcam Software ii.10 (lws210.exe), Logitech Movement Detector Gadget and Logitech QuickCapture Gadget it'south working for me. Visual Effects not function

    • Edited by todonormal Midweek, December 1, 2010 xi:fourteen AM addon

  • FOR WIN 7 x64:

    Download ftp://ftp.logitech.com/pub/techsupport/quickcam/qc1051enu_x64.exe

    Unpack the installation file (chosen qc1051enu_x64.exe) using Rar or 7z

    In the folder chosen Drivers\x64\PRO64\ open up lpro64v.inf and supervene upon all "08bd" with "08b4" or just add the corresponding lines

    Install software (skip connect cam) Become to "device manager" (reckoner/ right click - properties) select faulty unit of measurement in the list and click "update commuter"

    Select update driver from CD and select the file y'all just edited.

    Then select QuickCam Pro 4000

  • Good stuff! Works perfectly in Windows vii 64 bit.

    Thanks!

  • Sorry, when I run the install setup, it does not piece of work (says "this product is not for your OS...) Estimate I have to read more than of this long mail service...

  • http://www.styleofthestreets.com/?entry=8

    Hither is some item on a solution mentioned beneath

    • Proposed equally answer by D_rone Wednesday, January 4, 2012 7:31 PM

  • After reading this huge thread, trying to install my quickzoom (blue) on windows 7 ultimate 32 bits I finally manage to get it working !

    I was having the same probleme as many others, after reading the excellent walkthroug by Azural, in the end information technology didn't work, always the same error "Window establish the drivers but cannot installed it, not establish the specified files" blabla bla.... it was so frutrating !

    But in the end, after reading this page entirely i found that all of the driver were not working because it's not for the same camera and cheers to Tafari who pointed out that i accept to use 08b3 instead of 08b4.

    I just download the qczoom.zip change all the 08b4 by 08B3 and it worked !!! freaking, hell yea!!

    And so thanks all of you lot, and i hope this won't go with no attending.

  • vi years on, at present it'south Sep 2013. And this thread is yet of value. To me at least.

    My webcam is the Quickcam Zoom. I read the whole thread, but tried n8r4d3 's method and link showtime. Information technology worked on the outset attempt. Even though my photographic camera was thought by Win seven Home Premium every bit Quickcam 4000, it still works in Skype.

    Thanks to all who contributed to this thread.

    ------------------------------------------------

    SOLUTION Establish!!!

    Im using this for the quickcam Zoom on win7 32 bit.

    Download and unzip, works for 32 and 64 bit, although it claims 64 bit only, it worked on my win7 ultimate 32 bit.

    This of class was after following this entire thread with every solution catastrophe in the aforementioned "Cannot find file" fault encounted while installing the driver.

    This worked perfectly, no hacking or fiddling. but download unzip and point the driver update window to the directory and go! works in skype and msn PERFECTLY!

    zoom/face tracking works, as do all the image modes and colour balancing options.

    n8r4d3

  • After trying everything constitute on the forums and goose egg worked, this proved to piece of work without any problems :)

    I have a windows x64 fleck professional and recently bought an old quickcam zoom to practise some astronomy photography with my telescopeþ  Well no drivers would work until i stumbled on this

    http://digiex.internet/downloads/download-center-2-0/drivers/9924-logitech-quickcam-zoom-windows-seven-32bit-x86-64bit-x64-driver-download.html

    1. extract into a binder with aforementioned name

    2.plug the spider web camera

    iii.Get to devices and printers

    4.right click the unknown usb and cull properties

    five.click the update driver for the unknown device

    6.Click the discover manually push click the browse button

    vii.choose the binder that you extracted with rar program and hit the PRO64 folder nether qzoom binder

    and hit Side by side

    Works perfectly

    I downloaded so the webcam software from this softonic site and everything is working fine :)

    http://gsf-cf.softonic.com/2a5/20f/30f25246fe7af0fb669cd05e7eaa38ba5b/file?SD_used=0&channel=Web&fdh=no&id_file=299967&instance=softonic_en&blazon=PROGRAM&Expires=1425992140&Key-Pair-Id=APKAJUA62FNWTI37JTGQ&Signature=K0xNUg8hQoaDN5a2~gNFnLT2nCahqz1UP3djZmOo1~b2CyBs2AuOMPBXMCNdP5dAev5vAvffoRv--C28gYHsm~e9V8O1dPoCmnwys-DG3Tz3jbxibsPGk5WV3YXvtomPErY0QGpLwmGBjGZGNAeB7y1RFZKPaDZGT8qaNp7RbZc_&filename=lws251.exe

    Hope it works for yous as well

    Þorkell

    •

Source: https://social.technet.microsoft.com/Forums/en-US/3b84de22-b6c3-4f46-a57f-781f2cf2a664/logitech-quickcam-zoom-driver

Posted by: spiveystootherents.blogspot.com

0 Response to "Driver Logitech Quickcam Zoom Windows 7"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel